Good feedability, consistant welding performance.
Very good weldability, stable arc, and low spatter.
High productivity.

· Good slag detachability
· Deposition efficiency can be improved
· Excellent mechanical properties

· AC and DC dual-use

· Perform all-position welding

· Good operation performance

Good feedability, consistant welding performance.
Very good weldability, stable arc, and low spatter.
High productivity.

• Excellent intergranular corrosion (IGC) resistance
• With enough ferrite content to avoid hot cracking
• Shielding gas required,

• Good heat resistance and corrosion resistance;
• Stable arc, beautiful weld;
• Use for welding dissimilar alloys like mild steel and the stainless steels;
• Shielding gas required, usually Argon/CO2 mix;

• Used for the welding of dissimilar materials between stainless and low alloy steels;
• Well suited for austenitic ferritic joints;
• Suited for stainless with wet corrosion.

• 0.03% carbon content increases resistance to intergranular corrosion;
• Use for welding dissimilar alloys like mild steel and the stainless steels;
• ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures;
• shielding gas required, usually Argon/CO2 mix;

• Excellent intergranular corrosion (IGC) resistance
• With enough ferrite content to avoid hot cracking
• Shielding gas required,

ER316LSI affords the same characteristics as 316L. With higher silicon allows greater arc stability along with minimal post-weld grinding.

ER316LSI affords the same characteristics as 316L. With higher silicon allows greater arc stability along with minimal post-weld grinding.

• Resistance to cracking and fissuring
• Excellent oxidation resistance
• Radiographic quality welds

• Improves arc stability;
• High Si content improves wetting characteristics
• Excellent corrosion and scaling resistance;
• Smooth welds;
• Controlled ferrite content ensures excellent crack resistance

• Improves arc stability;
• High Si content improves wetting characteristics
• Excellent corrosion and scaling resistance;
• Smooth welds;
• Controlled ferrite content ensures excellent crack resistance

【Flux Core】There is a flux core inside the flux cored wire, which is used to stabilize the arc, improve the operating performance and play a protective role.

【High Efficiency】 Flux cored wire adopts continuous welding method, so the production efficiency is high.

【Excellent Welding Performance】Suitable for all positions welding, and it has less spatter and good weld formation.

E71T-GS is a self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 510MPa. All-positional welding of single pass automatic and semi-automatic fabrication.

Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount; Buy More Save More!

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc