• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal

E71T-GS is a self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 510MPa. All-positional welding of single pass automatic and semi-automatic fabrication.

【Flux Core】There is a flux core inside the flux cored wire, which is used to stabilize the arc, improve the operating performance and play a protective role.

【High Efficiency】 Flux cored wire adopts continuous welding method, so the production efficiency is high.

【Excellent Welding Performance】Suitable for all positions welding, and it has less spatter and good weld formation.

Self shielding steel MIG wire

Ideal for DIY use, automotive repair, general repair and maintenance

No shielding gas required

E71t-1c is a Co2 gas shield flux-cored wire used for all positional welding, can also be used for vertical down welding Provide good operation properties with easy slag removal, stable arc, less smoke and spatter.

E71t-1c is a Co2 gas shield flux-cored wire used for all positional welding, can also be used for vertical down welding Provide good operation properties with easy slag removal, stable arc, less smoke and spatter.

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount; Buy More Save More!

Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount; Buy More Save More!

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

• Vacuum sealed foil bag package
• Stable and consistent with CO2 and mixed gas
• Easy Slag removal
• Small splash
• beautiful welding seam
• Excellent welding performance and soft and stable arc

Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount; Buy More Save More!

E71T-GS is a self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 510MPa. All-positional welding of single pass automatic and semi-automatic fabrication.

【Flux Core】There is a flux core inside the flux cored wire, which is used to stabilize the arc, improve the operating performance and play a protective role.

【High Efficiency】 Flux cored wire adopts continuous welding method, so the production efficiency is high.

【Excellent Welding Performance】Suitable for all positions welding, and it has less spatter and good weld formation.